When you identify potential regions and suppliers, you need to collect information about the factory. It helps to know the factory's requirement for placing an order and the cost involved, the brand of machinery used in production, how many production lines will be available for your order, how they source the raw material, and perhaps capture some factory photos. Be sure their licensing certificates are valid. Duramagicfloor carefully selects suppliers from equipment to material supply.
We have state of the art machinery for Homag for the profile to ensure accuracy and we have the most advanced automatic Chevron machine which is the only one in China, with high precision on profile (the tolerance can be controlled in 0.05mm) and high daily output can be 1000sqm/day.
Test the moisture content of wood floor. According to different moisture content to the wood floor classify. Make sure the floors are at the same level.
Simulate the pavement floor, Touch by hand and visual inspection to ensure that the edge joint of the wooden floor is smooth and the T&G can combine.
Classify the T&G board according to the natural color variation. Make the color in most uniform.
Paint Film Color & Quality
Professional workers will remove defects UV coated wooden floors in the UV coating production line. Ensure high quality and uniform color of the wooden floor paint film.
Measure the width, length, thickness of the wood floor to ensure the size.
Eucalyptus Core Plywood for multi-layer: Eucalyptus or Russian Birch
Pine or Poplar Core Core layer for Three layers: pine or fir
Pine Core Bottom layer for two layers: pine
Our requirement for plywood :
Export grade CP/CP, pronounced «CP grade» corresponds to GOST 3916.1–96 class III / III.
No decay, bubble, crack, borehole
Moisture content is most important for the balance of flooring
Top Finishing Of Lacquer Or Oil
We will make all tests for the top coating
Adhesion of coating
Varnish surface hardness
Cold Press Adhesive (For The Pression Of Top Lamella And Plywood）
The requirement for cold glue we use must:
Eco-friendly, good bonding performance.
Every batch we will make a test of the bonding performance:
Put the flooring into 70℃ hot water for 2hours, and then put into an oven to dry for 3hours. Be sure no delamination for each layer.
Duramagicfloor is a flooring trading company integrating quality management and sales. Quality control and manufacturing departments work in tandem in every phase and process, ensure the quality of the final product.